Edmund Optics® utiliza cookies propias y de terceros para mejorar los servicios técnicos de nuestra página web. ¿Cómo utilizamos las cookies?

  • Mi Cuenta
  •   
 

ON DEMAND WEBINAR

9/26/19   |   See All Webinars
Multi-Element Lens
Design for Manufacturability

Designing a high-performance lens is only one part of an optical designer's job. The more elusive challenge is often in the tolerancing of that lens and in linking toleranced performance to as-built performance.

Close the loop between design and fabrication!

Join us for a 45 minute webinar presented by design and manufacturing experts Katie Schwertz and Shelby Ament to learn about the challenges and best practices of designing manufacturable lens assemblies. This webinar will provide background information on how a multi-element lens assembly is manufactured and assembled while providing insights on details that should be taken into consideration in the design and tolerancing stages. Taking extra time early on to consider these details can improve performance and yield, while reducing costs in the long run.

Throughout this webinar, participants will gain insight on the following topics:

  • Traditional glass lens manufacturing basics
  • Rules of thumb for designing manufacturable lens element geometries
  • Considerations for statistical distributions in tolerancing
  • Realistic surface irregularity maps and their impact on as-built performance
  • Multi-element assembly processes and tolerancing methods
Katie Schwertz - Senior Design Engineer, Edmund Optics

Katie Schwertz is a Senior Design Engineer in Edmund Optics' Tucson, Arizona, USA office. She is responsible for executing optical and optomechanical designs, tolerancing, analyses, and prototype evaluations for both internal development and external customers. Katie received her MS in Optical Sciences from University of Arizona, College of Optical Sciences and a BS in Optics from University of Rochester, Institute of Optics. She is a co-author of the SPIE Field Guide to Optomechanical Design and Analysis.

Shelby Ament

Shelby Ament was formerly an Optical Research Engineer at Edmund Optics in the Barrington, New Jersey, USA, office. She was responsible for developing new optical metrology and fabrication techniques to improve Edmund Optics’ manufacturing capabilities. Shelby received her PhD in Optical Science from the College of Optical Sciences at the University of Arizona and bachelor’s degree in Physics from DePauw University. Her dissertation involved design and fabrication of holograms to improve performance of solar energy systems.

 

Register

 

Additional Resources

Application Notes

Technical information and application examples including theoretical explanations, equations, graphical illustrations, and much more.

Mechanical Design, Assembly, and Alignment of Optical Systems
Read  

Chromatic and Monochromatic Optical Aberrations
Read  

Comparison of Optical Aberrations
Read  

How to Design your own Beam Expander Using Stock Optics
Read  

Keys to Cost Effective Optical Design and Tolerancing
Read  

Tips for Designing Manufacturable Lenses and Assemblies
Read  

Understanding Optical Specifications
Read  

Related Pages

Additional webpages that describe related products, capabilities, or concepts.

Imaging Lens Assemblies
Go  

Videos

Informative corporate or instructional videos ranging from simple tips to application-based demonstrations of product advantages.

How an EO Imaging Lens is Made
Watch  

EO Imaging Lab
Watch  

¿Desea una oferta?

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram



×