Edmund Optics® utiliza cookies propias y de terceros para mejorar los servicios técnicos de nuestra página web. ¿Cómo utilizamos las cookies?

  • Seleccione País
Visualizar los 6 productos de esta familia.

Coherent® Beam Position Thermopile Power Sensors 1168339 | 10mW-3W

Stock #68-627
Cant. 1
Precio por Volumen
Pida una Oferta
Active Area Diameter (mm):
Model Number:
Coherent Part Number: 1168339
Type of Sensor:
Quad Element Thermopile
Length of Cable (m):
Linearity (%):
Computer Interface:
Minimum Incident Beam Power (mW):
Calibration Uncertainty (%):
Incident Power Density (W/cm2):
Calibration Wavelength (nm):
Incident Power Density (mJ/cm2):
0.5 (10ns, 1064nm)
Long Pulse Joule Mode Range (J):
0.5 - 10
Long Pulse Joule Mode Accuracy (%):
Spectral Compensation Accuracy (%):
Cooling Method:
Maximum Incident Beam Power (W):
Wavelength Range (μm):
0.25 - 10.6

Regulatory Compliance

RoHS 2015:

Product Family Description

  • Thermopile Detector Element for High Power Measurements
  • Measure Beam Position on Detector Surface
  • ISO 17025 Certified

Coherent® Beam Position Sensing Thermopile Power Sensors are all-purpose sensors designed to measure the average power or energy of a wide variety of continuous wave or pulsed lasers. Coherent Beam Position Sensing Thermopile Power Sensors utilize a quadrant thermopile detector disk to sense the position of the laser beam on the detector surface while measuring the laser power. Coherent thermopile sensors can operate across a wide range of input powers, and do not saturate.

Note: The LM-20 is designed for embedded use and must be mounted on a heat sink.

¿Desea una oferta? Inserte un número de producto para recibir una oferta en solamente dos etapas.

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram