Edmund Optics® utiliza cookies propias y de terceros para mejorar los servicios técnicos de nuestra página web. ¿Cómo utilizamos las cookies?

  • Seleccione País
  •   
 
Visualizar los 6 productos de esta familia.

Coherent® Beam Position Thermopile Power Sensors 1168342 | 100mW-25W

Stock #68-629
€1.695,00
Cant. 1
€1.695,00
Precio por Volumen
Pida una Oferta
Minimum Power (mW):
100
Power Range:
100mW - 25W
Wavelength Range (μm):
0.25 - 10.6
Active Area Diameter (mm):
19
Cooling Method:
Air
Model Number:
LM-45
Coherent Part Number: 1168342
Type:
Meterless
Type of Sensor:
Quad Element Thermopile
Length of Cable (m):
2.5
Linearity (%):
±1
Computer Interface:
USB
Maximum Incident Power Density (kW/cm2):
6
Calibration Uncertainty (%):
±2
Calibration Wavelength (nm):
10,600
Long Pulse Joule Mode Range (J):
0.5 - 50
Long Pulse Joule Mode Accuracy (%):
±3
Spectral Compensation Accuracy (%):
±1.5
Maximum Incident Energy Density:
600mJ/cm2 (10ns, 1064nm)
Maximum Incident Beam Power (W):
25

Regulatory Compliance

RoHS 2015:

Product Family Description

  • Thermopile Detector Element for High Power Measurements
  • Measure Beam Position on Detector Surface
  • ISO 17025 Certified

Coherent® Beam Position Sensing Thermopile Power Sensors are all-purpose sensors designed to measure the average power or energy of a wide variety of continuous wave or pulsed lasers. Coherent Beam Position Sensing Thermopile Power Sensors utilize a quadrant thermopile detector disk to sense the position of the laser beam on the detector surface while measuring the laser power. Coherent thermopile sensors can operate across a wide range of input powers, and do not saturate.

Note: The LM-20 is designed for embedded use and must be mounted on a heat sink.

¿Desea una oferta? Inserte un número de producto para recibir una oferta en solamente dos etapas.

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram



×